BS350 ACCESSORIES
ASSOCIATED ACCESSORIES AND THEIR PRODUCT CODES
Access Rail - BSAR
The BS350/12M is bolted to the top of the BSAR Access Rail. It provides for 600mm of slide movement. Because the press is positioned sideways on the rail, when slid out it positions the press as to allow access to the rear to facilitate easy operation. The BSAR is equipped with end of stroke locks and an Interlock contact switch.
Battery & Isolator Switch - BSB12
The Deep draw battery is charged from the main truck battery at a controlled rate by a specially sized +ve wire (supplied). This ensures the truck battery is not discharged and allows the Swage Press to operate at full voltage and amperage without the running the truck engine. For safety, the Isolator disconnects power to the press while driving. An extra tapping for Hose Saw is supplied.
Battery & Isolator Switch - BSB24
The Deep draw battery is charged from the main truck battery at a controlled rate by a specially sized +ve wire (supplied). This ensures the truck battery is not discharged and allows the Swage Press to operate at full voltage and amperage without the running the truck engine. For safety, the Isolator disconnects power to the press while driving. An extra tapping for Hose Saw is supplied.
Colour Swage Control - CSD/LITE...
48 preset stations can be programmed into the press. A 2 x 16 digit display provides “Stations” where the operator selects Hose/Coupling & the Die Set Colour is displayed with the setting automatically installed. The settings can be installed without “Springback” providing guaranteed settings without measurement check. Excellent choice for semi-skilled operators
Depth Stop - BS350DS
The Depth Stop provides Quick Exact positioning of the hose assembly. Excellent for high volume/repetitive work. It has a Pneumatic Spring which allows for length growth during the swaging process without damage to the coupling.
Die & Tool Rack - BS50E-DUPLO
The BS50E-DUPLO is bolted on top of the BSAR Access Rail, behind the swage press. It is a double sided “A-Frame” style unit incorporating 11 Die Rosettes & 1 Quick Change Tool storage bin. This arrangement move out with the Swage Press on the Access Rail to facilitate easy & quick Die changes. 1 x BS50EQCT Quick Change Tool included.
Die Box - BS50EDB
A portable Die Box with storage for 8 die Sets as well as 1 x BS50EQCT Quick Change Tool, 1 x BS350GT Grease Tool etc. Each rosette will provide quick charging and dis-charging of the BS50EQCT Quick Change Tool (Included).
Express Swage Contol - EX/LITE...
Instead of the operator consulting a chart to find the required Die Set + Offset value, he now just sets the press to the required swage value and the control will inform him of the required Die Set and automatically installs the required Offset value.
Extended Range & Special Profile - 50E...
The Extended Range of Die Sets Available are as follows:
50E-6.5..........................6.5 to 8mm finished swage.
50E-8.............................8 to 10mm finished swage.
50E-10...........................10 to 12mm finished swage.
50E-12..........................12 to 14mm finished swage.
50E-14..........................14 to 16mm finished swage.
50E-76...........................76 to 84mm finished swage.
50E-84...........................84 to 92mm finished swage.
or consult your Dealer for special profile.
Foot Pedal - BSFP
The Foot Pedal allows the operator to have his hands free while operating the press. It also provides for the press to go into “Fully Automatic” mode with Auto Retract to a specified Open Diameter set on the control panel. Provides for fast/repetitive operation.