BS125 ACCESSORIES
ASSOCIATED ACCESSORIES AND THEIR PRODUCT CODES
Access Rail - BSAR
The BS125/12M is bolted to the top of the BSAR Access Rail. It provides for 600mm of slide movement. Because the press is positioned sideways on the rail, when slid out it positions the press as to allow access to the rear to facilitate easy operation. The BSAR is equipped with end of stroke locks and an Interlock contact switch.
Battery & Isolator Switch - BSB12
The Deep draw battery is charged from the main truck battery at a controlled rate by a specially sized +ve wire (supplied). This ensures the truck battery is not discharged and allows the swage press to run at full voltage and amperage with out running the truck engine. For safety the isolator disconnects power to the press while driving an extra tapping for the hose saw is supplied.
Colour Swage Control - CSD/LITE...
48 preset stations can be programmed into the press. A 2 x 16 digit display provides “Stations” where the operator selects Hose/Coupling & the Die Set Colour is displayed with the setting automatically installed. The settings can be installed without “Springback” providing guaranteed settings without measurement check. Excellent choice for semi-skilled operators.
Depth Stop - BS125DS
The Depth Stop provides Quick Exact positioning of the hose assembly. Excellent for high volume/repetitive work. It has a Pneumatic Spring which allows for length growth during the swaging process without damage to the coupling.
Die & Tool Rack - BS25E-DUPLO
The BS25E-DUPLO is bolted on top of the BSAR access rail, behind the swage press. It is a double sided "A-Frame" Style Unit incorporating 11 Die Rosettes & 1 Quick Change Tool storage bin. This arrangement moves out with the swage press on the access rail to facilitate easy and quick die changes. 1xBS25EQCT quick change tool included.
Die Box - BS25EDB
A portable Die Box with storage for 8 die Sets as well as 1 x BS25EQCT Quick Change Tool, 1 x BS125GT Grease Tool etc etc . Each rosette will provide quick charging and discharging of the BS25EQCT Quick Change Tool (Included).
Express Swage Control - EX/LITE...
Instead of the operator consulting a chart to find the required Die Set + Offset value, he now just sets the press to the required swage value and the control will inform him of the required Die Set and automatically installs the required Offset value.
Extended Range & Special Profile - 25E...
The extended range & of dies set available are as follows:
25E-6.5........................6.5 to 8mm Finished Swage
25E-8...........................8 to 10mm Finished Swage
25E-10........................10 to 12mm Finished Swage
25E-12........................12 to 14mm Finished Swage
25E-14........................14 to 16mm Finished Swage
or consult your dealer for a special profile.
Foot Pedal - BSFP
The Foot Pedal allows the operator to have his hands free while operating the press. It also provides for the press to go into “Fully Automatic” mode with Auto Retract to a specified Open Diameter set on the control panel. Provides for fast/repetitive operation.
Quick Change Rack - BS25EQCR
All Die Sets are installed in this free standing wall unit. It can also be installed into the BS-CAPRI height adjustable press stand. Each rosette will provide quick charging and discharging of the BS25EQCT Quick Change Tool (included).